This module contains all the items necessary to set up either two single 10m ground bladder tanks with tapstands or two tanks connected to four tapstands. Used to set up one or two distribution points to small communities, health or feeding centres, transit camps, etc
- This module is designed to make the ordering of a rapid response distribution system easier but do check the equipment required for your specific context and order additional items as needed.
- It is recommended that there is at least 1.5m height difference between the gate valve on the water tank and the top of the tap stand, to overcome the friction loss in the system and to ensure that the taps shut off properly
- The Fittings kit, Distribution Adaptation (Code: DA) is included to connecting to non-Oxfam systems.
|1||2||TBT10||Tank kit, Bladder 10 m³|
|3||2||DP32C||Distribution Pipe, 32 mm, PE, 50m|
|4||1||DA||Fittings kit, Distribution Adaptation|
|6||2||FD1||Tablets, rapid test - for Pooltester|
- Ready To Ship: 2 days
- Made In: United Kingdom
- Packaging: Wooden Crate
- Item Dimensions (cm):
- Volume (m³): 1.664
- Weight (kg): 395