Water pump kit, 4", diesel engine

A reliable and robust diesel powered pump set with 4" suction and delivery connections. Capable of delivering up to 8 l/s at 35m head or 30 l/s at 20m head.

Kit includes hoses, all fittings for initial set-up and operation of the pump and service spare parts for the first year of operation.

Kit also conforms to MSF code: KWATKPUD150

• Pump and hoses fitted with Guillemin couplings, 3" BSP Threaded and DN80 Guillemin coupling options are included for onward discharge connections.
• The Service Pack is available for ongoing operation and maintenance of the pump.

User notes

• Pump is supplied mounted to the base of the crate. This is to provide a platform to keep the unit off the ground. Rubber foot pads are also supplied for the frame.
• The 5 litres of oil supplied in this kit should be used for running in the engine and discarded after 100 running hours and replaced with SAE 15W/40 lubricating oil (or equivalent) as supplied in the Pump Oil kit
• The fittings included are sufficient for most uses. The Pump Fittings kit, should be ordered to enable two pumps to be installed in series or parallel.
• A gate valve is included to allow optional throttling at outlet. It can also act as an isolation valve. Pumping against a fully closed valve must be avoided.
• It is recommended that, when pumping long distances or to higher elevations, the non-return valve included is fitted to the delivery side of the pump to reduce risk of surge damage.
• This self-priming pump has a built in non-return valve to aid priming. A low-friction foot valve (included in the kit) will also make priming easier, but will reduce the dynamic suction head. Where conditions permit, such as pumping water from a tank, the foot valve can be excluded from the pumping configuration.