Pump kit, Dewatering / Desludging with Generator
Pump kit, Dewatering / Desludging with Generator
Pump kit, Dewatering / Desludging with Generator
Pump kit, Dewatering / Desludging with Generator
Pump kit, Dewatering / Desludging with Generator

Pump kit, Dewatering / Desludging with Generator

Product Code: WSDP
Electrical, dewatering/desludging pump kit for handling heavily contaminated water with solids up to 30mm in diameter. Maximum head 20m.

This equipment is used for well cleaning and construction to keep the well empty and enable workers co carry out the work. A Well Access Tripod is advised to protect workers who are entering the well.

It can also be used for emptying pit latrines and in general building/construction.

User notes
  • Warning Engine fumes are heavier than air and could collect inside a well. To protect workers from fumes place the generator down wind and as far from the well as possible.
  • The purpose of the base plate is to prevent the legs of the pump sinking into the mud causing the impeller to try and drill itself downwards, which results in the pump becoming clogged. If the base plate is not present either suspend the pump just above the muddy bottom, turn it on its side or put it in a large perforated bucket.
  • Pump:
    2" (50 mm) immersible/submersible pump with cast iron casing, screw type impeller.
    Direct driven by 1.5kW, 400V, 3 phase, 50Hz, IP68 electric motor.
    Complete with male hose tail outlet and 25 metres of cable with 16A plug. The lead is looped and cleated around the pump handle to prevent pulling on the internal connections.
  • Generator:
    6000 watt, 400 volt, 3 phase, 50Hz brushless generator fitted with:
    hours counter, 1× 16 amp output socket protected by a power circuit breaker (ground fault detector), earth leakage trip (to prevent fatal electric shocks should the power lead or pump develop a fault or be damaged).
    Flanged coupled to petrol engine, governed to run at 3000 rpm complete with recoil starter, 3 hour fuel tank, low oil protection, exhaust system, air and oil filters

    Unit mounted on anti vibration mounts inside a robust tubular roll frame
Components included
Line# Quantity Unit Description
1 1 Each Heron SH-2QTP pump
2 1 Each Removable, 'anti-dive plate' attached to the base of the pump to prevent boring into soft ground
3 1 Each Generator with Briggs & Stratton OHV petrol engine, type 245432
4 40 Metre(s) Rope, 16mm
5 20 Metre(s) Electrical extension cable with socket connectors
6 23 Metre(s) Hose, Layflat, 2", Canvas with 2" hose clip
7 1 Kit(s) Toolkit, comprising: spark plug spanner, screwdriver and oil drain spanner, 5× 1.4 litre containers of engine oil
8 1 Each Sliding collar - to fit over the layflat where it exits the well
9 1 Each Coupling, Hose, 2" BSP(M), Brass
10 1 Each Two-wheel site trolley for generator set
11 1 Set(s) Spares (for 1000 hrs operation): 2 x spark plugs, 2 x air filter elements, 16A plug, 2" hose clip
12 8 Metre(s) Cable protection hose (fitted)
  • Ready To Ship: 2 days
  • Made In: United Kingdom
  • Packaging: Wooden Crate
  • Item Dimensions (cm): 112 x 76 x 101
  • Volume (m³): 0.871
  • Weight (kg): 202