Pump kit, Submersible, 4"

Product Code: BS4
£7,179.00
A 4" diameter pumpset supplied with rising main, wellhead assembly and control panel. Used for pumping from water depth 60-110m.

This pump requires a 3-phase, 415V power supply. A generator of minimum 12kVA is recommended. Oxfam code KG16 will power this pump and have capacity to supply an office, compound, or clinic etc.

NOTE: Damage can be done to submersible pumping equipment and to the borehole if the system is not selected correctly and pumping is not carefully controlled and managed. A full borehole draw-down test is an essential part of pump selection and system operation.

User notes
  • A Dip Meter is required and should be ordered, one per programme office or per technical team.
  • To reduce the crate size the pump and motor are supplied separately. These must be assembled on site.
  • The Rising Main installation kit, Code: BSPI, is designed for raising and lowering pumps where the flexible rising main is fitted.

Specification

Multi-stage submersible pump with electric motor

  • rated flow 8m³/hr at rated head 107m
  • 4" diameter pump and 3-phase motor 50 Hz
  • power requirement 4.0 kW - a minimum 12 kVA generator is recommended
  • Control panel:
    Manual motor starter with soft start function
    Motor protection: dry run, under/over voltage, phase loss
    IP67 appliance inlet and socket outlet

Components included
 
Line# Quantity Unit Description
1 1 Each Franklin Electric VS8/23, 4" multi-stage submersible pump
2 1 Each Franklin Electric 3.7 kW motor
3 110 Metre(s) Pump cable, 4 mm² cross-sectional area, 4 core HO7RNF pump drop cable with cable gland and 4-pin plug fitted
Control panel
Line# Quantity Unit Description
4 1 Each Control panel, with 5-pin appliance socket inlet & 4-pin socket outlet
5 10 Metre(s) Power Cable 4mm² , 5 core, with 32A 5-pin plug & socket fitted
Rising main and wellhead assembly
Line# Quantity Unit Description
6 1 Each Wellhead assembly, 2", mild steel with hole for dip tue and hole/sltot for cable
7 100 Metre(s) Angus Wellmaster WM150, 2" flexible rising main
8 2 Each Wellmaster rising main couplings - 2" BSP(M), stainless steel with double-ring clamp, bolts and spare bolts
9 1 Pack(s) Wellmaster hi-torque tie-wraps for flexible rising main - 100 pce
10 1 Pack(s) Welmaster cable saddles - 100 pce
11 1 Each Bend, 90º, 2" BSP(M-F), GI
Non-return valve assembly - pre-assembled
Line# Quantity Unit Description
12 1 Each Nipple, Hex, 2” BSP(M), GI
13 1 Each Valve, Non-return, 2" BSP(F), Brass
14 1 Each Nipple, Barrel, 2" BSP(M), 300mm long, GI
15 1 Each Flange, 2" BSP(F) to suit flow metre
Control valve assembly - pre-assembled
Line# Quantity Unit Description
16 1 Each Flange, 2" BSP(F) to suit flow metre
17 1 Each Nipple, Hex, 2” BSP(M), GI
18 1 Each Tee, Reduced branch, 2" x ½" BSP(F), GI with ½" ball valve fitted
19 1 Each Nipple, Hex, 2” BSP(M), GI
20 1 Each Valve, Gate, 2" BSP(F), Brass, PN16
21 1 Each Nipple, Hex, 2” BSP(M), GI
22 1 Each Tee, Reduced branch, 2" x 1" BSP(F), GI
23 1 Each Nipple, Hex, 2” BSP(M), GI
Fitting and accessories
Line# Quantity Unit Description
24 1 Each Flow metre, 2", Woltmann Helix type
25 1 Set(s) Flow meter assembly set: nuts, bolts, washers, gaskets
26 1 Each Pressure gauge, ½" BSP(M), heavy duty, bottom entry, glycol filled, 16-20 bar max with ball valve and reducing bush fitted
27 100 Metre(s) Dipper tube, 25 mm, PE with end closed with cable tie
28 1 Each Compression adapter, 25mm x 1" PE plus end cap - for dipper tube
29 2 Pack(s) Cable ties, 8x100 mm, 100 pce - for dipper tube
30 2 Each Bend, 90º, 2" BSP(F-F), GI
31 1 Each Nipple, Barrel, 2" BSP(M), GS, 1m length
32 1 Each Blanking plug, 1" BSP(M) - for Tee
33 1 Each Blanking plug, ½" BSP(M) - for Tee
34 1 Each Tap, ½", Hose connector type, Brass, heavy duty
35 1 Each Reducing bush, 1-¾" BSP, GI
36 2 Each Nipple, Hex, 2" BSP(M), GI
Installation and spares kit
Line# Quantity Unit Description
37 1 Each Gate valve, 2" BSP(F), PN16, brass
38 1 Kit(s) Rising main tool kit: Water pump pliers 70 mm opening (x2), torque wrench plus adapter set and 4, 5 mm sockets, Allen keys 4, 5mm T-handle type, Allen keys socket type, knife, file, feeler set
39 10 Roll(s) PTFE tape
40 6 Roll(s) Loctite 55 thread
41 6 Roll(s) Tape, insulating, coloured
42 1 Each Heat gun, 230V
43 1 Each 16A plug - for heat gun
44 2 Kit(s) Shrink-fit joint kit for 4-core, 4mm cable
45 1 Each Pump cable gland
46 1 Each Spanner, combination, 13 mm - for pump assembly
  • Ready To Ship: 6 weeks
  • Made In: Italy
  • Packaging: Wooden Crate
  • Item Dimensions (cm): 132 x 120 x 60
  • Volume (m³): 0.95
  • Weight (kg): 289

RELATED PRODUCTS

Dip Meter
Three lengths available
£247.00
Generator, 16kVA
£9,235.00